4-IN-1 WATER TESTING METER
4-IN-1 WATER TESTING METER
No se pudo cargar la disponibilidad para recogerlo
-
Pedido
- - -
Pedido listo
- - -
Entregado
4-IN-1 WATER TESTING METER
See the Readings. Track the Changes. Understand Your Water Better.
This compact 4-in-1 Digital Water Testing Meter brings TDS, electrical conductivity, and temperature readings together in one handheld tool for everyday water monitoring.
- Four display modes: view TDS, EC, Celsius, and Fahrenheit.
- Quick digital feedback: get readings within seconds on a backlit LCD.
- Ready for routine checks: batteries, a quick-start guide, and a downloadable TDS reference guide are included.
A Clearer View of Your Routine
Useful Numbers, Without a Complicated Setup
Track TDS
Compare total dissolved solids readings across samples or monitor changes over time.
Check Conductivity
View EC readings as another useful measurement for your water-care routine.
Read Temperature
Switch between Celsius and Fahrenheit for the unit you prefer.
See Results Clearly
A backlit LCD makes the displayed numbers easier to read during testing.
Move Beyond Appearance Alone
Your Water Looks the Same. Have the Readings Changed?
Whether you are comparing water before and after an RO system or keeping notes for an aquarium or hydroponic setup, visual checks do not give you TDS or EC values. This meter puts those readings, plus temperature, in your hand so you can make more informed comparisons.
Read TDS in context: A TDS number or display color does not establish whether water is safe to drink. The promotional chart above should not be used to diagnose health risks or identify individual contaminants. Use appropriate water testing when safety is the concern.
Practical Features That Matter
Built for Straightforward Everyday Checks
Fast Digital Readings
Measurements are displayed within seconds, making repeated checks convenient.
Titanium Alloy Probe
A titanium alloy sensing probe is part of the meter’s compact testing design.
Automatic Shutoff
An auto-off function helps conserve battery power between checks.
Included Reference Guide
A downloadable TDS guide helps put readings into the context of common water applications.
Understand What You Measure
Four Display Modes. Three Measurement Categories.
The 4-in-1 format displays TDS, electrical conductivity, and temperature in two units. TDS is shown in ppm, EC in µS/cm, and temperature in °C or °F. Use these readings to compare samples and track trends within a consistent testing routine.
Know the limits: This meter does not measure pH or water hardness. It does not identify individual heavy metals, bacteria, or other specific contaminants, and it is not a drinking-water safety certification tool.
Make Checks More Consistent
Less Guessing. More Useful Comparisons.
Practical benefit highlights, not customer testimonials.
A Baseline You Can Record
Note your usual readings so future changes are easier to spot.
Convenient RO Comparisons
Compare TDS readings before and after an RO system as part of routine monitoring.
More Organized Water Care
Keep EC, TDS, and temperature notes alongside your other application-specific tests.
A Tool That Is Easy to Keep Nearby
The compact handheld format is practical for regular checks at home.
One Meter. Several Routines.
For Home Water Checks, Aquariums, Hydroponics, and RO Systems
Use the meter when you want a convenient way to record TDS, EC, or temperature. It fits into home water comparisons, aquarium maintenance, hydroponic monitoring, and RO-system checks alongside the other tests each application requires.
Application matters: There is no single TDS target that suits every aquarium, crop, or water source. Use requirements specific to your setup and carry out separate testing where needed.
A Simple Testing Routine
Prepare. Measure. Record.
Prepare Your Sample
Use a clean container, remove the protective cap, and follow the quick-start guide to prepare the probe.
Select and Measure
Turn on the meter, select the desired mode, and immerse only the sensing end to the marked limit.
Read and Record
Wait for the reading to stabilize, note the value and unit, then clean and store the probe as directed.
Consistency tip: Use clean containers and a consistent sampling method. Rinse the probe between samples to reduce carryover, and follow the supplied instructions for calibration and maintenance.
Important clarification: The illustration above does not mean this meter can identify or quantify lead, mercury, chromium, or individual chemicals. TDS and EC readings describe aggregate electrical properties, not a contaminant-specific analysis.
Add Numbers to Your Routine
Digital Monitoring vs. Looking at the Water
| Check | This Digital Meter | Visual Inspection Alone |
|---|---|---|
| TDS | Provides a numerical TDS reading. | Does not provide a TDS value. |
| Conductivity | Displays an EC reading. | Does not measure conductivity. |
| Temperature | Shows temperature in °C or °F. | Does not provide a numerical temperature. |
| Trend tracking | Provides readings you can record and compare. | Can note visible changes, but not these numerical measurements. |
Designed for Everyday Handling
Small Details That Make Routine Checks Easier
Backlit LCD
A lit display helps keep the numbers visible during testing.
Accessible Controls
The pictured design includes MODE, CLEAR, and ON/OFF HOLD controls.
Marked Immersion Limit
The indicated line helps guide placement of the sensing end without immersing the main body.
Protective Probe Cap
The removable cap covers the sensing end between checks.
Specifications
Your Meter at a Glance
| Product type | 4-in-1 digital water testing meter |
| Display modes | TDS, EC, Celsius, and Fahrenheit |
| Displayed units | ppm, µS/cm, °C, and °F |
| Display | Backlit LCD |
| Probe | Titanium alloy |
| Power feature | Automatic shutoff |
| Approximate dimensions | 15.5 cm long × 3 cm wide, as shown in the supplied image |
| Included items | Digital meter, batteries, quick-start guide, and downloadable TDS reference guide |
| Common applications | Home water comparisons, aquariums, hydroponics, and RO systems |
| Not measured | pH, water hardness, or individual contaminants |
Check the supplied manual: Refer to the package for measurement ranges, calibration instructions, battery specifications, and operating conditions.
Keep Your Meter Ready
Simple Care Between Tests
1. Rinse the Probe
Clean the sensing end between samples and after use according to the supplied instructions.
2. Protect the Electronics
Do not immerse the main body or battery compartment. Respect the marked immersion limit.
3. Cap and Store
Replace the protective cap and follow the manual’s storage and battery-care guidance.
FAQ
Know Your Readings and Their Limits
What does “4-in-1” mean?
The meter has four display modes: TDS, electrical conductivity, temperature in Celsius, and temperature in Fahrenheit. Celsius and Fahrenheit are two units for the same temperature measurement.
Can it tell me whether water is safe to drink?
No. TDS and EC readings cannot establish drinking-water safety. A low number or green display does not rule out harmful contaminants. Use appropriate testing for your water source and concerns.
Does it measure pH, hardness, or heavy metals?
No. It does not measure pH or hardness, and it cannot identify individual heavy metals or other specific contaminants. Those require suitable separate tests.
What is included?
The supplied description lists the meter, batteries, a quick-start guide, and a downloadable TDS reference guide. Follow the package information for access to the digital guide and setup instructions.
Make Monitoring Part of Your Routine
A Quick Check. A Clearer Record.
From home filtration to your aquarium or growing setup, keep useful TDS, EC, and temperature readings close at hand. Measure consistently, track changes, and understand what your numbers mean.
